Air-Row Fan Co. now offers HEAVY DUTY INDUSTRIAL GRADE CIRCULATING FANS
Air-Row Fan Company is pleased to introduce a new product line: Industrial Grade Circulating fans!

This high quality line of circulating fans economically provides relief from the summer heat by creating a gentle air movement.  They effectively cool large areas in factories, stores, restaurants and other public places.  These fans have a low rpm motor which allows them to operate very quietly. 30" models are capable of air flow rates of 100 FPM @ 150 ft from the center of the fan. 24" models are capable of moving 100 FPM @ 100 ft.

The floor pedestal type fans come with a sturdy decorative base and is supported by an adjustable tubular steel post which provides maximum stability.  The wall mount fans are anchored with a sturdy wall bracket.  There is also an optional ceiling mount. 

 On all fan models, the fan assembly can be tilted on a swivel bracket to direct the air stream upwards or downwards.  Available with oscillating motor on the pedestal and wall models.

FEATURES:
* Rugged, high performance models
* Available in 24" and 30" sizes
* 1/4 HP, 2 amps, 3 speed, totally enclosed ball bearing motor with thermal overload protection
* Fan speed motor RPM- 1100 / 950 / 850
* Available with oscillating motor on the pedestal and wall models
* Heavy gauge aluminum, well balanced fan blades
* Air stream adjustable in all directions
* Complete with 10', 120 volt grounded cord set
* Attractive powder coated front and rear guards, meets OSHA standard
* CSA Canada / USA approved

MODEL HVR:
HIGH VELOCITY HEAVY DUTY INDUSTRIAL DRUM FANS

FEATURES:
1) Heavy 18 gauge, powder coated steel housing
2) Factory balanced blade
3) Permanently lubricated, totally enclosed motors
4) 2 speed dial switch on 24" and 36' models
5) Drum fans pivot up for directional control with strong locking mechanism.
6) Complete with 10', 120 volt grounded cord
7) Powder coated front and rear guards meet OSHA standards
8) Heavy duty wheel kit makes fan easy to move
9) 5" (HVR24) and 8" (other models) rubber wheels with STEEL (not plastic) hubs
10) Complete with conversion kit for ceiling mount 


HVR24:
24" Diameter, 2 speed, 1/3 HP, 1100 RPM, 7000 CFM, 120 volts, 1.8 amps, 43 lbs.
HVR36:
36" Diameter, 2 speed, 1/2 HP, 825 RPM, 12000 CFM, 120 volts, 4.9 amps, 103 lbs. 
HVR42:
42" Diameter, 1 speed, 1/2 HP, 825 RPM, 15000 CFM, 120 volts, 6.8 amps, 142 lbs.
HVR48 (shown as a ceiling mount, may be used as a portable roll-around unit):
48" Diameter, 1 speed, 1 HP, 825 RPM, 22000 CFM, 120 volts, 10.9 amps, 172 lbs.

MODEL HVD: HIGH VELOCITY
 DRUM FANS

FEATURES:
1) Heavy 18 gauge, powder coated steel housing 
2) Factory balanced blade
3) 2 speed dial switch on 36" and 42" models
4) complete with 10', 120 volt grounded cord
5) Powder coated front and rear guards meet OSHA standards
6) Heavy duty wheel kit makes this fan easy to move.
7) 8" rubber wheels with steel hubs.



HVD36A:
36" diameter, 2 speed, 1/3 HP, 1100 RPM, 9600 CFM, 120v, 3.8 amps, 77 lbs.

HVD42D:
42" diameter, 2 speed, 1/2 HP, 840 RPM, 12000 CFM, 120 v, 5.4 amps, 120 lbs.

MODEL LF: 18" EPOXY WALL / CEILING MOUNT CIRCULATOR


FEATURES:
1) 3 speed commercial duty circulating fan
2) 18" blades, pull chain switch
3) all metal construction
4) epoxy coated OSHA guard
5) 9' heavy duty cord & plug with cord wrap (110 v)
6) steel wall / ceiling mount assembly
7) suitable for wet locations

LF18HVW: 18" diameter, 3 speed, 1/8 HP, 5700 CFM (high), 120 volts, 1.45 amps (high) 

MODEL HVF:
HIGH VELOCITY FLOOR, TABLE, WALL FANS